top of page
Anchor 1

Wall plaster machine with petrol engine and integrated batching mixer.


With 2 petrol engines by KOHLER for independency from the electric power supply!

Anchor 1

With a total power of 20.5 hp the new PS 180 GM  plaster pump is a true "Killer of Giants"!

The new PS 180 GM is equipped with two petrol engines, one of 14 hp for the pump and one of 6.5 hp for the batching mixer. Both engines are with an electric start and with EPA certification.

This "explosive" pack provides performance similar to quite bigger and costly machines.

It is a wall plaster machine suitable for a broad range of applications:

  • Plastering with site mixed plasters.

  • Plastering with dry ready-mixed plasters.

  • Plastering with traditional materials and lime-cement plasters.

  • It is ideal for spraying cement mortars on 3D panels.

  • Plastering and pumping perlite, EPS beads and other lightweight materials.

  • Pumping foam concrete.

  • Spraying thermal insulating materials

  • Pumping self-leveling flooring materials.

  • Pumping of screeds and cement mixes.

  • Spraying and pumping fiber cementitious materials.

  • Spraying reinforcing cement based materials.

  • Injecting cement grouts.

The KAPPA PS 180 GM is challenging the competition in efficiency and costs!

Can you compare it with another machine in this category?

Total power: 20.5 hp

Standard output: 3.6 cubic meters per hour.

Max. pumping pressure: 30 bar

Twin cylinder air compressor: Ingersoll Rand.

Air compressor flow: 500 l/min

Mixer capacity: 150 liters

Hopper capacity: 180 liters

Base price: 7.300 USD

PS 180 GM plastering pump.jpg

The PS 180 GM plaster machine is a cost saver in many ways.

  • It is simple, fully mechanical without hydraulic parts and complex electronics providing increased reliability and easy and low cost maintenance.

  • Its performance is similar to bigger screw pumps and it costs much less.

  • The standard size 7 screw pump costs less than 2L6 screw pumps and lasts longer.

  • Thanks to its compact dimensions it can be transferred and stored easily indoors and be protected from the rain and the weather conditions.

PS 180 GM wall plastering machine 2.jpg



The vibrating screen that is placed under the mixer of the PS 180 GM filters the material from big particles that can block the spray gun nozzle.

The material is discharged fast from the wide opening of the mixer.



The 6.5hp mixer engine is well protected in the engine hood providing also safety to the user.

The hood door opens easily and wide for the convenient start and maintenance of the engine.

PS 180 GM plaster machines 2.jpg


For the relief of the pressure in the pump and in the pipes there is a customized heavy duty valve.

The pressurized material returns back in the machine hopper.

PS 180 GM spray plastering machine.jpg


A quick anti-rust coupling is placed under the hopper making the cleaning of the machine a very easy task.



The PS 180 GM is very versatile machine and its control panel make its operation very easy.

The pumping function is two-way controlled, by the machine applicator from the contol panel switch and remote controlled by the spraying applicator from the spray gun switch.

The two openings in the frame of the machine provide access to the electric start key switch and the air chuck switch.

PS 180 GM plaster machine.jpg


The PS 180 GM is powered by a 14hp green technology petrol engine with electric start and EPA certification.

For the spraying application the PS 180 GM is equipped with a twin cylinder air compressor made by Ingersoll Rand with a capacity of 740 l/min.

The machine hood can be removed very easily providing easy and convenient maintenance of the mechanical parts of the machine.

A safety switch turns off the engine when the machine hood is removed.

PS 180 GM plaster pumps batching mixer 2


The 150 liters integrated batching mixer of the PS 180 GM is very efficient with the site mixed and the premixed materials in bags offering premium and fast mixing.

A safety system switches off the mixer engine when the mixer protection lid is lifted.

The batching mixer is not welded on the frame and it can be removed with the engine as one package whenever is required


When the mixer is removed it can be used separately as a general purpose batching mixer.

PS 180 GM spray plaster machine 2.jpg


The apron that is attached on the mixer preventing the dry materials to fall in the PS 180 GM hopper during the loading of the materials in the mixer, is mounted without fittings and it can be removed very easily for more convenient cleaning of the machine.

Standard version parts

  • Petrol engine 14 hp with electric start.

  • Restoration hopper 140 l.

  • Batching mixer 150 l, with a petrol engine 6.5 hp with electric start.

  • Screw pump imported from Germany with clamp.

  • Integrated twin cylinder Ingersoll Rand air compressor.

  • Heavy duty gearbox.

  • Transmission system

  • Vibrating sieve with vibrator.

  • Material conveying shaft.

  • Robust chassis frame mounted on wheels.

  • Toolbox.

  • Rubber hoses.

  • Air hose.

  • Spray gun with nozzles.

  • Material pressure gauge.

  • Mixer lid with a safety system.

  • Safety switch.

  • Remote start-stop pumping system.

Quality standards

  • Green technology petrol engines.

  • Air compressor by Ingersoll Rand.

  • Screw pump made in Germany.

  • Heavy-duty gearbox.

  • Rubber hoses.

  • All fabrications and processes are made by CNC and laser cutting machines.

  • Heavy-duty gear box.

  • Imported electric vibrator.

  • The material conveying shaft made of steel alloy.

  • The mixer shaft is hard chromed and made of steel alloy.

  • Hard chromed transmission shaft.

  • Steel hoses couplings.

  • Powder coated.

  • The threaded parts are galvanized or chrome plated for anti-rust resistance.


  • Petrol engine driven, no need of electric power supply.

  • Fully mechanical and reliable without complex hydraulics and electronics.

  • Compact sized machine.

  • Efficient and versatile.

  • Powerful, 14hp.

  • Affordable and costs saving machine.

  • Low loading height.

  • Suitable for a big range of materials.

  • Productive with performance similar to bigger screw pump machines.

  • Remote controlled.

  • Suitable for site mix with raw materials.

Plastering machine technical data

* The data is theoretical and it depends mainly on material quality, composition and consistency, the diameter of the conveying hose, the screw pump size and the mix design. The delivery performance in height and distance cannot be achieved simultaneously.​

All technical description, information and technical data of this site may change without prior notice from our company, please contact us for any additional information about the products and get the latest data update and information.

bottom of page